PRODUCT INFORMATION

DTB9696RRT - PID thermoregulator with two outputs: 1- relay output 2- relay output - current sensor input overall dimensions along the front 96x96mm Functions of Delta DTB thermostats: - temperature measurement and display of its current value on the built-in 4-digit digital LED display of red light ; - display of the set temperature value on the second built-in digital 4-digit green LED display; - automatic determination of the PID controller coefficients (autotuning); - formation of a control signal at additional (AL1 and AL2) outputs according to the two-position law (10 signaling modes); - blocking the action of buttons; - built-in RS-485 interface. Differences between DTB and DTA - Universal input that allows working with 13 types of temperature sensors (including THK), as well as with 4 types of input analog signals (0 ~ 5V, 0 ~ 10V, 0 ~ 20 mA, 4 ~ 20 mA). - Automatic step-by-step temperature control (8 preset values ??of temperature and time for maintaining the set temperature) - Dual-circuit control of outputs (simultaneous control of heating and cooling via two outputs) - Possibility of connecting a current transformer to control the heating element breakage. The current sensor (CT) is included with the regulator. The load current can be shown on the display and transmitted via RS-485. The operator can set the upper and lower current limit, upon exceeding which the controller will issue an alarm message. - Three signal outputs Two discrete inputs for connecting external switches (input1: start / stop regulation; input2: switching between two set temperature values) - Various sizes (front panel: 48x24, 48x48, 48x96, 96x96) RS-485 (Modbus ASCII / RTU) - Software software for monitoring and controlling the controller from a PC